Talk about several installation methods of LED display screen

LED display has a very wide range of brightness adjustment and diversified installation methods, so it can be well used in a variety of spaces and scenes. Today, follow the LED display manufacturer Shenzhen zhongpinrui to see what the main installation methods of full-color LED display are. Let's have a look

1. Inlaid installation, in indoor or outdoor scenes, is usually used for indoor small-area installation, because the installation space is relatively small. In order not to occupy the installation space, dig an area of the same size on the wall according to the screen area of the display screen, and embed the full-color LED display into the wall. It should be noted that it must be a solid wall, and the cost of pre maintenance is generally high, If it is installed outdoors, the forward structure is more suitable for the LED display screen project, which has been considered in the planning and design of the building. During the construction of the building project, the installation space of the display screen is reserved. During the actual installation, only the steel structure making photos can be enough to embed the LED large screen in the building surface and leave enough maintenance space on the back;


2. Wall mounted installation is more suitable for indoor use in a slightly larger environment. The installation area is generally small. There are certain requirements for the load-bearing capacity of the installation wall, so the wall needs to be a solid wall. Hollow brick or simple lattice retaining wall are not very suitable for this installation method;


3. For hanging installation, many application scenarios are airports and stations. For the installation area is relatively large, it mainly plays the role of indication signs. It is required that the area of the screen body is relatively small, and there needs to be a suitable installation location, such as a beam or lintel above. Generally, the screen body should be covered with a back cover;


The ordinary hanging installation is applicable to the single box display screen with the total weight of the wall less than 50kg. It can be directly hung on the load-bearing wall without reserving maintenance space. The display box adopts the way of front maintenance. When repairing, just lift the display screen from the bottom. Rack mounted installation is mostly used in outdoor scenes. The difficulty of maintenance of outdoor display screen needs to be considered. Steel structure is used to support between the screen body and the wall, and 800mm maintenance space is reserved. Maintenance facilities such as channels and ladders are configured in the space, and auxiliary equipment such as distribution cabinet, axial fan, air conditioner and lighting are installed;


4. Column type installation is more used in large screen scenes of outdoor advertising. It requires a wide field of vision and relatively open space around, such as urban landmarks, squares and parking lots. According to the size of the screen body, it can be divided into single column and double column installation. Column installation is more suitable for LED display screen in open space. Outdoor LED display screen is installed on column. Column type not only needs to make special steel structure, It is also necessary to make concrete or steel columns, focusing on the geological conditions of the foundation;


5. Roof type installation is mainly used in outdoor LED advertising screens. The installation location is mainly on the roof of the building. The waterproof, lightning protection and wind resistance of the product in later use need to be considered across the height of the building;


6. Base type installation: build a wall with concrete structure on the ground that is enough to support the whole LED display screen, and build a steel structure on the wall to install the display screen. The steel structure needs to reserve 800mm maintenance space and place relevant maintenance facilities to facilitate the maintenance of products in the later stage;


The above is the analysis of the main installation methods of full-color LED display. I hope it can be helpful to you. If you need LED display, please contact Shenzhen Jiami Technology Co., Ltd!